What are the main features of the wire drawing machine?

The wire drawing machine belongs to the production and processing equipment for standard parts and other metal products. Its purpose is to process the wire or bar produced by steel manufacturers for standard parts and other metal product production enterprises through the wire drawing machine, so that the diameter, roundness, internal metallurgical structure, surface smoothness, and straightening of the wire or bar are the requirements for the processing of standard parts and other metal product production raw materials. Therefore, the pre-treatment quality of wire or bar by wire drawing machines is directly related to the quality of standard metal product manufacturing enterprises. The wire drawing machine belongs to the metal product equipment industry, and is widely used in the production and pretreatment of metal products such as steel wires, wire ropes, prestressed steel wires, and standard parts.
The main feature of the wire drawing machine is that there is an exhaust port on the cylinder, and the cylinder is connected to at least two sections. The pitch of the first screw is different from that of the screw behind it. It does not require a plastic mixer to stir and can suck out the water generated by the plastic in the mixture. Plastic wire has uniform thickness, smoothness, and is not easily broken, with high work efficiency and low energy consumption.
On June 28, 1999, the current national standard JB/T 7910-1999 for wire drawing machines was promulgated. This standard was implemented on January 1, 2000, replacing JB/T 7910-95. The national standard for wire drawing machines was first published as GB 10600-89 in March 1989, and was adjusted to JB/T 7910-95 in April 1996. The current national standard JB/T 7910-1999 specifies the model, basic parameters, technical requirements, testing methods, acceptance rules, marking, packaging, transportation, storage, and manufacturing guarantee of the wire drawing machine.
High frequency torque, stable output, high-performance vector control, good energy-saving effect, high-precision proportional linkage control slip compensation function, high-speed precision maintaining constant tension hardware circuit modular design to ensure stable and efficient operation of the circuit. Drawing table frequency converter appearance design combined with European car design concept, smooth lines, beautiful appearance, and independent air duct design are adopted for the structure. The fan can be freely disassembled, with good heat dissipation and no PG vector control. Unique "excavator" Adaptive control feature, during operation, the motor torque limit is automatically limited, effectively suppressing frequent overcurrent tripping and wide voltage input. The output voltage is automatically regulated by an automatic voltage regulator (AVR), which can instantly shut down without stopping the machine. It can also adapt to power with advanced PID algorithm built-in, fast response speed, strong adaptability, and simple debugging; Built in international standard MODBUS RTU ASCII communication protocol, users can achieve centralized control of frequency converter 485 communication network through PC/PLC control of upper computer